Sirako wulilanw jɔyɔrɔ ka bon bi jɔli la, u bɛ yɔrɔ nɔgɔlenw ni ɲɔgɔn cɛ siraw, awiyɔnbonda ani izini yɔrɔw lase. O masinw bɛ u jigi da jibolisira barikamaw ni baarakɛcogo ɲumanw kan walasa ka fanga sɔrɔ cogo basigilen na, ka kunnafoni dicogo ɲuman sɔrɔ, ani ka baara kɛcogo ɲuman sɔrɔ. [I ka Sosiyete Tɔgɔ] la, an bɛ fɛn bɛɛ lajɛlen di jiko yɔrɔw — i n’a fɔ ji pɔnpew , motɛriw , valvew , silindaw , funteni sɛgɛsɛgɛlikɛlanw , bolifɛnw ɲɛminɛyɔrɔw , ani fɛnw — minnu dilannen don kɛrɛnkɛrɛnnenya la sirabakan-minɛnw baarakɛcogo ɲininiw kama.
1. Jikofɛnw kolomaw ka ɲɛsin siraba wulilanw ma
2. Materiel & Process-Based Long-Tail daɲɛ kolomaw
An ka jilafɛnw dilannen don ni fɛnw ye minnu bɛ mɛn, minnu ka ɲi kosɛbɛ walasa ka baara kɛ waati jan kɔnɔ jɔli sigidaw la minnu ka gɛlɛn. Fɛn minnu bɛ fara ɲɔgɔn kan minnu bɛ fɔ kosɛbɛ olu ye:
Motɛri jilama min bɛ kɛ ni nɛgɛ ye
Silindri hydraulique nɛgɛma
Alloy steel ani copper alloy hydraulique pɔnpe
Silindri piston hydraulique nɛgɛ
O fɛnw bɛ sugandi u ka sɔgɔsɔgɔninjɛ, u ka sɛgɛn fanga, ani u ka funteni bɔli cogoyaw kosɔn — o bɛɛ nafa ka bon sirako baara la.
3. Baarakɛcogo ni baarakɛcogo caman ɲɔgɔnna
Walasa ka baarakɛcogo ɲinini suguya caman dafa sirabakan-minɛnw na, an bɛ ninnu di:
Ji-motɛriw minnu dilannen don ni tansiyɔnba ye
Ji-pɔnpe minnu mankan ka dɔgɔ
Lamini lakanani ji pɔnpew
Bololabaara ɲɛminɛcogo ɲɛminɛlanw
Pull-rod suguya jilama tulu silindaw
Kupu saniyalen tubabu tulu nɛnɛma funteni fɛnw falen-falen
4. Jagokɛyɔrɔw dilanni sugandiliw
An bɛ dɛmɛ don labɛncogo sugandilen caman na minnu dabɔra jɔli masinw kama:
Motɛriw (moteurs de orbite hydraulique).
Pompi minnu bɛ kɛ ni ji ye
Piston silinda minnu bɛ baara kɛ siɲɛ fila
Ji-yɔrɔ caman-kɔlɔsili-minɛnw
Hydraulique tulu nɛnɛ tubabukan funteni-falen-falen-minɛnw
Olu dabɔra doni kɔlɔsili ɲuman kama, ka yɛrɛyɛrɛ dɔgɔya, ani ka fanga sɔrɔcogo ɲɛ.
5. Fɛɛrɛko ɲɛfɔli
Fɛnɲɛnɛmako ɲɛfɔli jɔnjɔn dɔw bɛ duguma, B2B kuntigiw bɛ minnu ɲini tuma caman na jɔli masinw baara la:
| Component |
Specification |
| Pompe Hydraulique (Pompe Hydraulique) ye |
Tansiyɔn hakɛ: 250 bar |
| Valve Hydraulique (Valve Hydraulique) ye |
Baarakɛcogo tansiyɔn hakɛ: 20–31,5 MPa (200–315 bar) . |
| Yɔrɔ minnu bɛ Bɔ mɔgɔw la |
36–375 cm3/a bɛ se ka kɛ |
| Teliya min ka bon kosɛbɛ |
155–1 250 ye miniti kɔnɔ |
| Silindri hydraulique Diamètre (Damɛtiri). |
40–250 mm |
| Tulu Nɛnɛna Voltage |
220V ye |
6. Industriw ka baarakɛcogo n’a nafaw
An-minɛnw ji-yɔrɔw bɛ da u la nin baara ninnu na: sirabakan
Nafaw:
Yɛlɛma fanga ni baarakɛcogo ɲuman min bɛ bonya
Kunnafoni ɲɛminɛcogo nɔgɔman walasa ka manɛw kɛ
Degun sabatilen ka ɲɛsin yɛrɛyɛrɛ ni sɔgɔli fɛɛrɛw ma
Dɔ farala masinw baara waati kan ni yɔrɔw ye minnu bɛ se ka da u kan kosɛbɛ
7. Seereyaw ni jogoɲumanya sabatili
Fɛn dilannenw bɛɛ bɛ diɲɛ seereyaw sariyaw dafa i n’a fɔ:
An bɛ jogoɲumanya kɔlɔsili gɛlɛn mara fɛn dilanni, sɛgɛsɛgɛli ani pakew dilanni waati bɛɛ la.
8. Ɲininkali minnu bɛ kɛ tuma caman na (FAQ) .
J1: Jiko pɔnpe sugandi cogo di siraba wulilan kama?
A: Ni aw bɛ ji pɔnpe sugandi siraba wulilan kama, aw bɛ baarakɛcogo tansiyɔn, jibɔ hakɛ, a jiginni, ani a bɛnkan ni aw ka sistɛmu labɛncogo jateminɛ. Aw bɛ fɛnw ɲini i n’a fɔ mankan dɔgɔyali, fanga dɔgɔyali, ani funteni caman kunbɛnni ni wuluwulu bɛ kɛ yɔrɔw la minnu ka suma.
J2: Danfara jumɛn bɛ orbit motɛriw ni gear motɛriw cɛ siraba wulilanw na?
A: Orbit motɛriw bɛ girinya caman di teliya dɔgɔman na, minnu bɛnnen don taama bolicogo walima dunun yɛrɛyɛrɛcogo ma. Geriya motɛriw ka nɔgɔn, u ka ɲi kosɛbɛ tansiyɔn dɔgɔmanninw na i n’a fɔ bolifɛnw bolicogo walima ventilateur drives.
J3: Yala aw bɛ ji silindaw dilan minnu bɛ kɛ ka kɛɲɛ ni aw yɛrɛ sago ye, ka ɲɛsin rollo vibratory systems ma wa?
A: Ɔwɔ. An bɛ se ka piston silindaw dilan minnu bɛ se ka sama walima minnu bɛ baara kɛ siɲɛ fila, minnu bɛ bɛn i ka degun, i ka sɔgɔli janya, ani i ka sigili magow ma.
J4: Aw ka jiko yɔrɔw ka baarakɛ waati makɔnɔnen ye mun ye?
A: Ni ladonni ni baara kɛcogo ɲuman kɛra, a ka c’a la, an ka fɛn dilannenw bɛ baara kɛ sanga 5000–10000 kɔnɔ ka kɛɲɛ ni baarakɛcogo ye ani sigida cogoyaw.
9. Aw ye anw sɔrɔ walasa ka jiko furaw sɔrɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
Aw bɛ jikofɛnw ɲini minnu bɛ kɛ ka kɛɲɛ ni aw yɛrɛ sago ye walima OEM ye aw ka siraba wulicogo baara kama wa? Aw ye kuma an ka dɔnnikɛlaw ka kulu fɛ walasa ka specs caman sɔrɔ, CAD jaw, lead times, ani pricing. An bɛ diɲɛ kɔnɔ fɛnw ci teliya la ani ka dɛmɛ dafalen di feereli kɔfɛ.
