Product News - Dongguan Blince Machinery & Electronics Co., Ltd.

Company News Product News Success News Exhibition Information

Complete Guide To Hydraulic Cylinder Maintenance And Leak Repair

Hydraulic cylinders are critical power components in heavy machinery, but prolonged high-pressure operation often leads to issues like oil leaks and reduced thrust. Instead of opting for an expensive full-cylinder replacement, repairing the cylinder – especially replacing worn seals – is far more ec

2025 12-15

When Does A Hydraulic Motor Need A Gearbox?

A hydraulic winch with an integrated gearbox converts the motor’s high-speed rotation into the slow, high-torque output needed for heavy lifting. Hydraulic motors excel at high RPM, but they inherently trade off torque for speed. In many industrial drive systems—such as winches, conveyors, mixers, a

2025 12-12

Managing Hydraulic Oil Temperature: Causes of Overheating And Cooling Solutions

Hydraulic systems perform best when the oil stays within an optimal temperature range. In heavy machinery, hydraulic fluid is normally maintained around 30–60 °C for ideal viscosity and lubrication. When oil temperature climbs above ~65–80 °C, viscosity drops sharply and internal leaks increase, ca

2025 12-11

Troubleshooting Hydraulic Motor Speed: Why Forward Is Faster Than Reverse

Hydraulic motor setups often use a directional control valve and flow control to achieve forward/reverse rotation. In these systems, fluid flow and pressure determine the motor’s speed. The speed of a hydraulic actuator (motor or cylinder) is set by the flow rate delivered to it. When an actuator mo

2025 12-09

Single And Double Vane Hydraulic Pumps: Key Differences & Uses

Hydraulic vane pumps are common workhorses in fluid power systems, converting mechanical motion into hydraulic flow. There are two main vane pump types: single-vane (single-acting) and double-vane (double-acting) pumps. Though they share the basic vane-in-rotor design, their internal structures and

2025 12-08

Pneumatic Vs Hydraulic Cylinders: Industrial Applications

Pneumatic and hydraulic cylinders are essential mechanical actuators that convert pressure (compressed air or hydraulic fluid) into linear motionen.wikipedia.orgen.wikipedia.org. These devices form the “muscle” of industrial machinery, powering movements in factory automation, construction equipment

2025 12-05

Hydraulic Motor Maintenance: Preventing Damage From Idleness Vs. Overload

Hydraulic motors are critical rotary actuators in fluid‐power systems. They convert pressurized hydraulic fluid into mechanical rotation. Proper hydraulic motor maintenance is essential, because both neglect (long idle periods) and overuse (excessive load) can cause failures. This article examines h

2025 12-03

What Are The Parts of A Hydraulic Motor?

Hydraulic motors are critical components of any hydraulic system. A hydraulic motor is a mechanical actuator that converts hydraulic pressure into mechanical energy. Together with hydraulic pumps and motors, they form the core of fluid power transmission, driving countless types of machinery.Every h

2025 09-11

Tel

+86-769 8515 6586

Phone

+86 180 3845 8522

E-mail

sales01@blince.com

Address

No 35, Jinda Road, Humen Town, Dongguan City, Guangdong Province, China

Links

www.blince.cn

QUICK LINKS

PRODUCT CATEGORY

E-MAIL SUBSCRIPTIONS

Please subscribe to our email and stay in touch with you anytime。

Tel

Phone

E-mail

Copyright© 2025 Dongguan Blince Machinery & Electronics Co., Ltd. All Rights Reserved.

QUICK LINKS

PRODUCT CATEGORY

E-MAIL SUBSCRIPTIONS